SAFETY DATA SHEET ADH3A
1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY
Product Name:
|
SHEPPY DRY ADHESIVE |
Product Code:
|
SHEPPY RABBIT SKIN & GELATINE |
|
Supplier: Sheppy Limited
Rushenden Road
Queenborough
Kent
ME11 5HH
Telephone No: (01795) 580181
Fax No: (01795) 580649
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient Name: No disclosure necessary.
3. HAZARDS IDENTIFICATION
Hazard identification not required - product not
regarded as a health hazard under current legislation.
4. FIRST AID MEASURES
Inhalation: No hazard. Skin Contact: In our long
experience, the product is not a primary irritant;
prolonged and repeated contact can cause a reaction,
especially to sensitive skins. Barrier creams or gloves
in these cases are necessary. Eye Contact: These
products may cause smarting. Irrigate thoroughly with
warm water. If symptoms persist, seek medical advice.
Ingestion: These products are unlikely to be
unintentionally ingested in sufficient quantity to cause
discomfort. In cases of large quantity ingestion, use an
emetic and obtain medical advice at once.
5. FIRE FIGHTING MEASURES
Extinguishing Media: No restriction necessary. These
adhesives are non-flammable, having no flash point, and
therefore no special precautions are necessary. There is
no restriction on extinguishing needed. Hazardous
Decomposition Products: Carbon Dioxide and Carbon
Monoxide.
6. ACCIDENTAL RELEASE MEASURES
Spill Clean-Up Methods: Spillages of the made up hot
liquid may be peeled from most surfaces when cool, or
mopped up with hot water and disposed of according to
Local Authority Regulations. Cleaning: Wash all
equipment with warm water. If the adhesive has dried, it
is preferable to soak the equipment in cold water for 1
to 2 hours first.
7. HANDLING AND STORAGE
Storage: Stored in its dry state as supplied, in dry
and uncontaminated conditions, the product will remain
usable for at least twelve months. Handling: When
handled in a dry state it is unlikely that barrier
creams or gloves will be necessary, as contamination is
very unlikely.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Ingredient Name: No disclosure necessary.
Preservatives are present in extremely small
quantities, so they are not harmful. The product will
therefore grow mould within a matter of days once it has
been mixed with water, at which time it is necessary to
dispose of it. It presents no danger - provided the
general precautions (as note number 4 and 6 of this
leaflet) are followed.
9. PHYSICAL AND CHEMICAL PROPERTIES
Colour: Golden Appearance: Fine Powder Odour:
Odourless Physical Data Comments: A traditional glue
derived from animal protein. A glue of low colour and
odour which dissolves readily in water.
10. STABILITY AND REACTIVITY
Stability: Stable. If stored correctly, product will
remain in a usable state for at least twelve months.
Hazardous Decomposition Products: Fire - Carbon Dioxide
and Carbon Monoxide.
11. TOXICOLOGICAL INFORMATION
Non-toxic.
12. ECOLOGICAL INFORMATION
Degradability: Being natural products they are
environmentally friendly and are biodegradable. Paper
and board bonded with these products are recyclable.
13. DISPOSAL CONSIDERATION
The dried adhesive can be disposed of with normal
waste in accordance with Local Authority Regulations.
14. TRANSPORT INFORMATION
Label for Conveyance: No transport warning sign
required by road, air, sea or rail.
15. REGULATORY INFORMATION
Label for Supply: None Necessary
Risk Phrases: Not
Applicable Safety
Phrases:m Not Applicable
16. OTHER INFORMATION
User Notes: Leaflet ADH/3A conforms to the Chemicals
(Hazard Information and Packaging) Regulations 1993. The
information is based on the current state of our
knowledge and is intended to describe the product from
the view-point of safety requirements only.
REF: LEAFLET CHIPS/ADH3A ISSUE 9 - DECEMBER 2006
Buy adhesives and glues online, it's easy with Paypal...
|